Water Deaerating Systems

GEA VARIDOX-H hot water deaeration system

Oxygen in beer or other beverages can impair both shelf life and taste. For this reason, optimum degassing of the water used for beverage production and redilution of beer is of enormous importance for product quality. With the help of hot degassing, GEA VARIDOX-H water degassing system achieves very low residual oxygen levels, making it suitable for a wide range of applications.

Deaeration of beverage water

The VARIDOX-H system incorporates sensors for flow rate, filling level and, optionally, oxygen, and these sensors continually monitor key process parameters. 

Water at 72 °C is fed into the deaeration column and slowly trickles down the packed columns. The high temperature strongly reduces the solubility of the oxygen in the water. The countercurrent CO2 (N2) ensures an additional release of oxygen. 

The plate heat exchanger technology enables approximately 90% heat recovery, by means of a regenerating step, while a subsequent cooling section cools the deaerated water to the desired outlet temperature

VARIDOX CIP is carried out by passing the cleaning solution through the product lines and deaeration column. 

Features

  • Low residual oxygen content: <0.02 mg/l (20 ppb)
  • Even lower residual oxygen levels of <0.01 mg/l (10 ppb) or even <0.005 mg/l (5 ppb) achievable by increasing deaeration column height 
  • Water pasteurization (≥25 PE)
  • Heat recovery ≥90% 
  • Low CO2 consumption
  • Lower operating costs when compared with dearation under vacuum
  • Short installation time (the unit is pre-assembled)
  • Low maintenance costs
  • Can be supplied for flow rates between 20 hl/h and 1,000 hl/h

Technical data

  • Water inlet pressure: 2 bar
  • Control air pressure: 6-8 bar
  • Materials: 1.4301 / EPDM
  • CO2 inlet pressure: 6-8 bar
  • CO2 consumption: 0.05 g/l
  • CO2 included in the water: 0.45 g/l
  • CO2 required: 0.5 g/l
  • CO2 quality: >99.998% purity

Downloads

GEA Insights

Innovating patient care with aseptic spray drying

At GEA, our commitment to engineering for a better world fuels our pursuit of innovative solutions that enhance patient care and safety. One of our most promising ventures in recent years is aseptic spray drying – a technology...

Young people enjoying a beer together

Fermenting change: Three keys to a bright future for brewers

Breweries that become more flexible, sustainable and digital can more easily adapt to the changing beer market.

GEA employees - separation

Separate from the rest

The story of the GEA centrifuge begins in 1893, when Franz Ramesohl and Franz Schmidt began production of their patented mechanical milk separator, paving the way for modern dairy processing. The innovation helped overcome a...

Receive news from GEA

Stay in touch with GEA innovations and stories by signing up for news from GEA.

Contact us

We are here to help! With just a few details we will be able to respond to your inquiry.